by Fmeaddons
XPERTVAL®
XPERTVAL®
$0.00
XpertVal® is a conventional thermocouple based system for thermal mapping and validation. Thermocouples are installed in 3×20 channels module with cold junction compensation.
Sensors | Thermocouples | |
---|---|---|
Sensor length | Standard: 10 m (33 feet) | |
Sensor type | All type of thermocouples, most used: T, J, K | |
Temperature range | – Teflon: -200°C to +200°C – Kapton: -200°C to +400°C |
|
Accuracy | ±0.2°C after pre-calibration | |
Memory capacity | No limitation, data is stored in computer Backup memory: USB storage device compatible |
|
Tc Tip | Teflon: teflon tip to prevent moisture on the wire Kapton: no tip |
|
Sampling rate | Typical: 10 sec. for 20 channels (high resolution) Fast scan: 2 sec. for 20 channels (low resolution) |
|
Software | 21 CFR Part 11 | |
Module | The module accepts several inputs: 4 – 20 mA / 0-10 V / RTD (PT-100 2, 3 or 4 wires) | |
Close loop calibration | – Always needed when using thermocouples – System use temperature block and reference probe, software controlled – Reports generated automatically by the software |
|
Reference probe | IRTD Hart 1502 |
|
Dry blocks | PTC 125: -90°C to +125°C RTC 157: -45°C to +155°C RTC 159: -100°C to +155°C RTC 700 : +23°C to +700°C Fluke 9190: -90°C to +140°C Fluke 9170: -45°C to +140°C Fluke 9172: +35°C to +425°C |
|
Calibrations | Factory: NIST/COFRAC User calibration |
XpertVal® is suitable for a wide range of applications as follow:
- Ovens
- Autoclaves
- Stability Chambers
- Freezers
- Steam In Place
- Cold Rooms
- Refrigerators
- Sterilization Tunnels
- Warehouses
- Incubators
- Lyophilizers
Optional Accessories:
- Thermocouples (Kapton or Teflon Thermocouple Cables)
- Pressure Transducer (EN285 compliant triclamp pressure transducer to connect on the autoclave during validations)
- Fedegari Adapter (Adapter for Fedegari autoclave to feedthrough)
- Y/DN 50 (Stainless steel Y adapter)
- Feedthrough (Feedthrough assembly to pass 20/30 thermocouples into autoclaves)
- Dry Block Insert (Specific insert for validation in dry blocks)